Saw chain · Guide bars · Canada

Replacement chain and bars, sized to your saw.

UNISO makes semi-chisel and full-chisel saw chain from German alloy steel with hard-chrome cutters, plus matched guide bar and chain sets, in the Oregon sizes most homeowner and farm saws run.

Browse

UNISO 16-inch guide bar and chain
German alloy steelHigh toughness and fracture resistance
Hard-chrome cuttersStay sharp longer in dirty or frozen wood
Heat-treated rivetsResist stretch, keep running true
Oiled, ready to cutInstall straight out of the box

Saw chain

Sold in 1, 2 and 3 packs. Every chain is a direct size match for the Oregon part shown.

Guide bar + chain

A reversible sprocket-nose bar with 1 to 6 matching chains. Swap the bar when the rails are worn, keep spares on the shelf.

Read your bar before you buy

The saw model alone is not enough: the same saw can take an 16" or 18" bar, and each length needs a different chain. The numbers you need are stamped on the tail of the bar, near the mount.

Pitch

3/8" LP · .325" · 3/8"

Distance between rivets, divided by two. Low-profile (LP) 3/8" is common on light saws; .325" and full 3/8" on mid and larger saws.

Gauge

.043" · .050" · .063"

Thickness of the drive links where they sit in the bar groove. It must match the bar exactly.

Drive links

40 – 72 DL

The count of the teeth that ride in the groove. Count them on your old chain if the bar stamp is worn.

Not sure which one fits?

Send us the saw model and the numbers stamped on your bar, and we will tell you which chain to order.

[email protected]